Super Brain Telekinesis

...

With such super plug-ins as mind power and spiritual perception, Wu Hao assembled a simple 3D metal printing melting equipment naturally very quickly.

In less than 20 minutes, Wu Hao did all this and concentrated all the existing electricity on this simple 3D metal printing device.

After all, it takes a lot of power to completely smelt those metal raw materials and then print them into shapes, so Wu Hao has even turned off all the computers and lights in the base now, in order to save all the power to supply this simple machine. 3D metal printing equipment.

Due to the ability of mind and mental perception, turning on or not turning on the lights does not actually affect his work. However, if the base has enough electricity, he is naturally used to bright spaces.

Soon, Wu Hao officially started work. The first thing he did was the shell device of the fusion reactor. This spherical shell has a very complicated shape, with many complicated internal structures and metal pipes connected to the outer door.

And inside this metal device, there are several layers of devices, and the last is the internal magnetic field device.

In this way, in the next week, Wu Hao started from scratch to manufacture the reactor and the corresponding energy conversion device, steam turbine generator set, cooling system and other devices.

The number of various parts and components required by all these devices is also extremely large, and the required metal raw materials are also quite a lot. So Wu Hao had to buy a large amount of metal raw materials again while manufacturing.

Fortunately, the metal materials that Wu Hao chose were not restricted military special metals in China. He placed orders directly in some large steel factories in the country, and then shipped them to Chang'an, the city closest to him.

Then, Wu Hao can only act as a porter at night. Although these metal bumps are small in size, they are not light, so Wu Hao doesn't carry much each time.

A few tons of metal steel, in fact, looks like a little bit. Therefore, Wu Hao basically has to carry for several hours every night.

Some of the purchased metals and steels did not meet Wu Hao's requirements for making some parts, so he had to smelt these metals and add some rare metals to them to increase their strength and hardness.

Although Wu Hao can only improve slightly by doing this, it can't improve too much, but basically it can be barely enough. At most, it is just a little less time in terms of lifespan, but as long as your base has energy, it is not difficult to develop metal materials with better strength.

For example, Wu Hao can already do the special metal manufacturing technology mastered by various countries now, but mass production requires a lot of equipment and sites.

Therefore, Wu Hao's base can only produce a small number of special alloys at most, and these alloys can only be used as some key parts.

Now Wu Hao basically purchased these key components, and he couldn't process them by himself with his current ability.

However, after a week, Wu Hao still completed the manufacture of the reactor. The remaining work is to convert the energy of the reactor into mechanical energy, and then drive the generator set to generate electricity.

According to this work schedule, it will take Wu Hao a week to complete it, but now that Wu Hao is working on a nuclear fusion reactor, the source of raw materials for this reaction is much simpler than before.

Because the raw materials used in nuclear fusion are hydrogen isotopes deuterium [dao] and tritium [chuan]. Deuterium is widely distributed in nature, and the place with the most deuterium in the world is the ocean.

Therefore, it is much easier for Wu Hao to obtain nuclear fusion raw materials than fission raw materials. He can get them in China, because ordinary people are useless even if they buy them.

You said you were going to use it to make **? Then if you want to detonate a bomb, you have to make an atomic bomb first.

In fact, in many foreign countries, there are many nuclear physics enthusiasts among the people who build small nuclear fusion reactors privately in their homes or garages.

However, the reaction they created can only simply emit light and generate heat, and it cannot release much energy by itself.

After all, even countries in the world have not yet achieved this by spending huge sums of money and using a lot of manpower and material resources. No matter how good these folk masters are, they are just pretending.

If they could really master this technology, they would have been pulled into the country to help develop fusion energy.

However, after Wu Hao's nuclear fusion reactor started to work normally, he still had to have a complete place for refining raw materials in the future. Because at that time, the amount of raw materials he needs will definitely start to increase, and it is not realistic to obtain them by purchasing or other means.

In this way, Wu Hao was busy again for 6 days, and finally completed the last process. Although Wu Hao has not officially started the whole set of fusion reactor power generation device designed by himself. But since he has already done all the simulation experiments in his brain, he is not worried that he will not be able to work normally after starting up.

After all, during the ten-day continuous manufacturing process, all the parts and structures were finally formed and assembled after his detailed calculation and confirmation.

"Finally, it's not in vain. As long as the fusion reactor is activated later, the entire base will no longer need to worry about power issues. Those noisy diesel generators can be fused to make raw materials by then. "Wu Hao has been busy for so many days, and he is naturally very tired.

From his design to the final manufacturing, it took a total of about a month, and the fast manufacturing speed was all due to his plug-in with mind power and spiritual perception.

If Wu Hao does not have the help of mind power, then even if he has a very complete and detailed drawing in his mind, even if he has a strong industrial foundation as support, he will not have half a year or a year to complete a nuclear fusion power generation facility. It can't be done.

Because the processing of these parts alone is a very complicated and cumbersome thing, and in the final manual assembly, very detailed debugging and so on are required.

Not to mention the manufacture of high-tech facilities such as nuclear fusion reactors, even the installation of growth lines and other related equipment in some projects, from installation to commissioning, and then to official operation, all these during this period will not take a long time. Row.

...

UU Read Books welcomes all book lovers to come and read, the latest, fastest and hottest serial works are all in UU Read Books! Mobile users please read here.